GuidesStone Care Guides

Perhaps you have some lovely-looking travertine floors in your home. The reality is that travertine comes with a wide assortment of voids and holes. Usually, the holes are filled at the factory prior to the travertine being delivered for consumer usage. However, some spots may be missed, or some of the filler may come out. That is why the holes and voids need to be filled. When the holes are filled, this will allow cleaning the travertine to be more efficient.

You are the kind of person who likes projects that you can do yourself. As a result, you have been wondering how to use a travertine filler kit. This article will provide you with valuable information to help you use a travertine filler kit with success.

1 Use the Right Product.

When you want to fill the voids and holes in your travertine flooring, use a travertine filler. This is a type of epoxy that is designed primarily in order to fill the holes that you notice that are present in your travertine flooring. This is the best way to fill those holes. The product will be well-matched in regard to the smoothness of the texture of filler that the factory first applied. A great product to consider using is BonStone TravFill. It is non-toxic and easy to use.

2 Prepare the Travertine Filler.

You need to realize that you must prepare the travertine filler prior to using it to fill the voids and holes present in your travertine flooring. You should always follow the manufacturer's directions that are provided with the product that you choose to use. Then you can be sure that you will consistently achieve the best results.

When you need to mix the travertine filler, it is a good idea to use a surface that is flat, smooth, and non-porous. Thus, if you happen to have an extra tile left over, that will be an ideal item that will work well for your successful mixing of the travertine filler.

3 Apply a Hardener.

Consider the reality that you will likely have to mix a bit of hardener with the travertine filler. This is a normal additional step that is necessary for most travertine filler products. Follow the directions in regard to the type of hardener that you have selected to apply to the travertine filler.

4. Work at a Quick Pace.

It is important to work quickly when you are using the travertine filler to fill the various voids and holes. This is due to the fact that the filler sets rapidly within a period of approximately seven to ten minutes since the time that you prepare the travertine filler.

If the travertine filler hardens before you apply it to the voids and holes, it will not do the intended job of filling the voids and holes. That is why it is highly recommended for you to conduct the mixing of several batches of the filler along with the hardener if the case is that there are many voids and holes that require the application of travertine filler. In this manner, you will be sure that the filler will be ready to function as it should instead of hardening before you get all the voids and holes filled.

5 Use a Putty Knife.

When you need to place the filler on the travertine to fill those voids and holes, then a putty knife is a great tool to use for the application. It is wise to also place tape around the areas that you will fill. This will help you have less of a mess of extra filler that will need to be removed from the travertine.

Once you are done filling all the voids and holes, the tape can then be removed. Your putty knife will be ideal to use to ensure that the travertine filler is spread in a smooth manner, which will permit the filler to become even like the remainder of the travertine's surface.

6 Use Acetone for Cleaning Off Extra Filler.

When you have completed filling all of the voids and holes with the travertine filler, you need to clean off the excess filler. You can do that by using acetone. It is imperative to remove the extra travertine filler prior to it being completely set. You will have the space of about twenty-four hours to remove the excess filler, as that is about the amount of time that it will take for the travertine filler to be completely set.